Shandong Motor is mainly used in injection molding machinery, ships, cranes, engineering machinery, coal mining machinery, mining equipment, metallurgical equipment, ship accessories, petrochemical equipment, port cranes, etc. It has the advantages of small size, light weight, simple structure, good process performance, insensitivity to hydraulic oil environmental pollution, impact resistance, and low inertia. Do you all understand the issues to be aware of when using motors? Below, Shandong motor manufacturers will provide a specific introduction.

1. When the inertia force of the driven component is high, if it is specified to achieve braking or reverse or smooth operation in the short term, a valve buffer should be set in the return oil passage to avoid significant hydraulic impact and safety accidents.

2. When applying quantitative analysis to motors, if stable starting and parking are expected, necessary working pressure control or flow monitoring methods should be adopted in the control circuit design.

3. When Shandong Motor Motor is used as a driving force component for lifting or walking equipment, a speed limiting valve should be set to prevent the rapid descent of the lifted object or the overspeed of the lifting mechanism such as the vehicle on downhill roads, which may cause obvious safety accidents.

4. Because the motor always leaks, turning off the inlet and outlet of the motor to initiate braking will still result in slow movement. When long-term braking is required, a brake should be set to avoid rotation.

5. When the mold hydraulic motor must be fully loaded and started, attention should be paid to the rated starting torque of the motor. Since the starting torque of the motor is smaller than the rated torque, ignoring large hydraulic motors may make it difficult for the operating unit to operate.

6. Because the pump oil back pressure type (outlet working pressure) of Shandong Motor is higher than atmospheric pressure, the discharge oil pipe of the motor must be directly led back to the oil tank and cannot be connected to the motor return oil pipe.

The above six points are a detailed list of several issues that Shandong motor manufacturers need to pay attention to when using motors. We hope that you can pay attention to them when using them. If you want to consult more information about Shandong Motors, you can follow our company website.