Hydraulic motors are mainly used in injection molding machinery, ships, cranes, engineering machinery, construction machinery, and other fields. There are many key points for using hydraulic motors, and hydraulic motor manufacturers have rich experience. Below, hydraulic motor manufacturers introduce the key points for using hydraulic motors.

Hydraulic motor manufacturers recommend that when the hydraulic motor operates continuously for a long time, the pressure should be reduced by at least 25% compared to the rated pressure; Intermittent operation, with a pressure not exceeding the rated pressure and an instantaneous pressure not exceeding the pressure specified by the motor.

The hydraulic motor manufacturer recommends that the speed of the hydraulic motor should not be too low, and the oil drain port of the hydraulic motor should be separately connected to the oil tank. Hydraulic motors that maintain a braking state for a long time should use brakes to avoid radial forces on the shaft end of the hydraulic motor.

Hydraulic motor manufacturers introduce that when using hydraulic motors, it is necessary to ensure that the oil circuit is normal and that the hydraulic motor has sufficient return oil back pressure, that is, to achieve a low pressure of the hydraulic motor. This is the only way to ensure that the hydraulic motor can work properly.

The above are the key points for using hydraulic motors introduced by hydraulic motor manufacturers. The above summarized key points for using hydraulic motors are hoped to be helpful to everyone. The above content can be viewed when necessary.